X
    學術可視化工作室RC   登錄   提交文稿
學術英文編修

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

期刊標題檢索 COMPOS PART A-A 最新評論: Okay, thank you very much. (2026-03-20)


期刊名稱:   ISSN:   主題領域:   影響因子範圍: -
索引:   類別:   開放訪問:   排序方式:

[COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING]您好,您是該頁面的第 505044 位訪客。

期刊簡介
期刊名稱COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
LetPub Score
8.5
54 ratings
Rate

Reputation
8.9

Influence
8.2

Speed
8.7

期刊簡稱COMPOS PART A-APPL S
ISSN1359-835X
h-index152
CiteScore
CiteScoreSJRSNIPCiteScore Rank
14.801.7611.912
Subject fieldQuartilesRankPercentile
Category: Engineering
Subcategory: Mechanics of Materials
Q120 / 403
Category: Engineering
Subcategory: Ceramics and Composites
Q110 / 130

自引率 (2023-2024)8.60%自引率趨勢
掲載範囲
Composites Part A: Applied Science and Manufacturing publishes original research papers, review articles, case studies, short communications and letters from a wide variety of sources dealing with all aspects of the science and technology of composite materials, including fibrous and particulate reinforcements in polymeric, metallic and ceramic matrices, and 'natural' composites such as wood and biological materials. The range of applicable topics includes the properties, design and manufacture of reinforcing fibers and particles, novel architectures and concepts, multifunctional composites, advances in fabrication and processing of composite materials and structures, manufacturing science, process modelling, experimental mechanics, microstructural characterization of composites and their constituent phases, interfaces in composites, new approaches to prediction and measurement of mechanical, physical and chemical behaviour, and performance of composites in service. Articles are also welcomed on economic and commercial aspects of the applications of composites, design with composites and case studies. All articles are subject to rigorous peer review to ensure they make an important and novel contribution, and a high standard is set for both content and presentation. The Editors aim to conduct the review procedure with the minimum of delay so that prompt publication ensues.
官方網站https://www.journals.elsevier.com/composites-part-a-applied-science-and-manufacturing
在線稿件提交http://ees.elsevier.com/compositesa/
開放訪問No
出版商Elsevier Ltd
主題領域工程技术
出版國/地區ENGLAND
發行頻率月刊
創刊年1996
每年文章數594每年文章數趨勢
黃金OA百分比18.42%
Web of Science 四分位
2023-2024
WOS Quartile: Q1

CategoryEditionJIF QuartileJIF RankingJIF Percentage
ENGINEERING, MANUFACTURINGSCIEQ17/71
MATERIALS SCIENCE, COMPOSITESSCIEQ16/34
索引 (SCI or SCIE)Science Citation Index
Science Citation Index Expanded
鏈接到PubMed Central (PMC)https://www.ncbi.nlm.nih.gov/nlmcatalog?term=1359-835X%5BISSN%5D
平均審稿時間 *來自出版商的數據:
來自作者的數據: About 2.0 month(s)
競爭力 *來自作者的數據: Difficult
來自Elsevier的數據: 17%
在線文章發布時間來自Elsevier的數據: Average 4.7 Week(s)
參考鏈接
相關期刊 【COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING】CiteScore趨勢
自引率趨勢 每年文章數趨勢
作者評論
*所有的審稿過程指標,如接受率和審稿速度,僅限於用戶提交的稿件。因此,這些指標可能無法準確反映期刊的競爭力或速度。
  • 同一學科的期刊
  • CiteScore趨勢
  • 自引率趨勢
  • 每年文章數趨勢
  •  
    學科內的可信期刊 影響因子
    COMPOSITES PART B-ENGINEERINGH-index: 113

    CiteScore: 25.60
    CEMENT & CONCRETE COMPOSITESH-index: 122

    CiteScore: 22.50
    COMPOSITES SCIENCE AND TECHNOLOGYH-index: 187

    CiteScore: 16.80
    COMPOSITE STRUCTURESH-index: 130

    CiteScore: 14.80
    POLYMER COMPOSITESH-index: 73

    CiteScore: 7.70
    STEEL AND COMPOSITE STRUCTURESH-index: 35

    CiteScore: 7.20
    JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALSH-index: 39

    CiteScore: 8.70
    JOURNAL OF COMPOSITES FOR CONSTRUCTIONH-index: 83

    CiteScore: 7.10
    APPLIED COMPOSITE MATERIALSH-index: 44

    CiteScore: 5.30
    JOURNAL OF COMPOSITE MATERIALSH-index: 78

    CiteScore: 5.10
    學科內最受檢索的期刊 頁面查看次數
    POLYMER COMPOSITES1383389
    COMPOSITES PART B-ENGINEERING1127849
    COMPOSITE STRUCTURES788014
    COMPOSITES SCIENCE AND TECHNOLOGY664615
    CEMENT & CONCRETE COMPOSITES249420
    JOURNAL OF COMPOSITE MATERIALS155157
    APPLIED COMPOSITE MATERIALS151490
    JOURNAL OF REINFORCED PLASTICS AND COMPOSITES120952
    STEEL AND COMPOSITE STRUCTURES116615
    JOURNAL OF COMPOSITES FOR CONSTRUCTION89128
  •  

    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
    明年預測:
    穩步上升 無變化 逐步下降  刷新
  •  

     
  •  

     


首頁    上一頁    1    2    3    4    5    6    7    下一頁    末頁  (頁
/10)
  [COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING] 的評論撰寫評論
作者: 忽然1234


領域: 工程技术
審稿時間: 0.0 month(s)
結果: 待定&不明


撰寫評論

2026-03-20 16:01:29 評論於
Okay, thank you very much.
(0) 讚! | 忽然1234

作者: what


領域: 农林科学
審稿時間: 3.0 month(s)
結果: 修改後接受


撰寫評論

2026-03-20 15:52:39 評論於
In my impression, it is similar to the first time submitting to the system. The cover letter should clearly state the previous article number, and the comprehensive review comments from the editor will be included. It seems like a Response to Reviewer, where I combine the cover letter and response in one Word document, but the editorial assistant will categorize them. I have formatted the Word document with page breaks, making it easy to identify responses to the reviewers' comments. It seems that highlighting the article is done in the Word document after the main text. In fact, resubmitting is just like submitting a new paper, with a new number, but including the previous review comments can expedite the process.
(0) 讚! | what

作者: 忽然1234


領域: 工程技术
審稿時間: 0.0 month(s)
結果: 待定&不明


撰寫評論

2026-03-20 11:19:48 評論於
When you resubmit your manuscript, the system interface is different from the first submission (with options for response letter, manuscript, highlighted manuscript)? 
If it is the same, where should the response letter be submitted?
(0) 讚! | 忽然1234

作者: what


領域: 农林科学
審稿時間: 3.0 month(s)
結果: 修改後接受


撰寫評論

2026-03-19 11:54:15 評論於
I am not a big shot, just an ordinary experimentalist. When replying to the reviewers, there is a section labeled "Response to reviewers" for two reviewers, one Word file for each reviewer's comments. I have divided the responses by page. The first upload is the "Manuscript clear", followed by the "Manuscript modification (highlighted version)". I am not sure if there have been any changes in the submission system for revised manuscripts.
(0) 讚! | what

作者: 忽然1234


領域: 工程技术
審稿時間: 0.0 month(s)
結果: 待定&不明


撰寫評論

2026-03-18 21:04:31 評論於
Boss, when resubmitting, where do I submit the reply email and the highlighted version of the manuscript?
(0) 讚! | 忽然1234

作者: lixiaobai


領域: 工程技术
審稿時間: 0.0 month(s)
結果: 待定&不明


撰寫評論

2026-02-06 09:52:09 評論於
2.6 reject, because of its novelty.
(0) 讚! | lixiaobai

作者: lixiaobai


領域: 工程技术
審稿時間: 0.0 month(s)
結果: 待定&不明


撰寫評論

2026-02-05 20:54:26 評論於
2.4 with editor, Status Date updated.
(0) 讚! | lixiaobai

作者: 齐达内爱飘柔


領域: 材料科学
審稿時間: 0.0 month(s)
結果: 待定&不明


撰寫評論

2026-02-03 10:14:10 評論於
May I ask what is the reason for the rejection of the table?
(0) 讚! | 齐达内爱飘柔

作者: lixiaobai


領域: 工程技术
審稿時間: 0.0 month(s)
結果: 待定&不明


撰寫評論

2026-02-01 17:21:29 評論於
2026.1.31 With Editor
(1) 讚! | lixiaobai

作者: lixiaobai


領域: 工程技术
審稿時間: 0.0 month(s)
結果: 待定&不明


撰寫評論

2026-01-24 08:26:22 評論於
2026.1.20 Submit
2026.1.24 Editor Invited
(0) 讚! | lixiaobai

作者: 大大大大tree


領域: 材料科学
審稿時間: 0.0 month(s)
結果: 待定&不明


撰寫評論

2026-01-12 12:08:05 評論於
May I ask if it has been sent for review? I submitted on December 31st and it is currently in the "editor invited" status.
(0) 讚! | 大大大大tree

作者: 小佳佳


領域: 材料科学
審稿時間: 0.0 month(s)
結果: 待定&不明


撰寫評論

2026-01-04 17:24:52 評論於
26.1.4 Submitted to Journal
(0) 讚! | 小佳佳

作者: sncl


領域: 化学
審稿時間: 2.0 month(s)
結果: 修改後接受


撰寫評論

2025-12-23 12:46:35 評論於
The latest news has been accepted, thanks to editor Zhong Zhang! Best wishes for the improvement of Part A. Both reviewers have no further comments after the second review!
(0) 讚! | sncl

作者: what


領域: 农林科学
審稿時間: 3.0 month(s)
結果: 修改後接受


撰寫評論

2025-12-19 16:20:57 評論於
On August 12, 2025, submitted to Journal (transferred);
On August 14, 2025, within 8 authors, the file cannot exceed 10M, format modified;
On August 16, 2025, Under Review; 10 reviewers were sent before and after, 2 accepted the review (approximately two weeks, the editor will urge the reviewers once, thanks to the editor's efficiency, the changes in reviewers and time points can be noted);
On October 11, 2025, Required Review Completed, the editor decided to reject and resubmit. Both reviewers were leaning towards positive feedback, personally thinking one major revision and one minor revision;
On October 23, 2025, resubmitted the manuscript;
On October 25, 2025, sent to the 2 reviewers before, one reviewer submitted the review on the same day, the other reviewer did not review or reject, during this time, the editor again invited new reviewers, adding 3 each time, and one reviewer accepted the review the next day each time. Possibly by the end of the year, still not submitting review, inviting 8 reviewers, 4 accepted the review, finally one reviewer submitted the review, thanks to the editor for accelerating the review process in handling the manuscript;
On December 10, 2025, Required Review Completed, the associate editor's opinion, minor revision accepted, Note: minor revision still needs to be reviewed again, this time, the reviewers and editors processed it quickly, welcome everyone to actively submit manuscripts and citations.
(0) 讚! | what

作者: 忽然1234


領域: 工程技术
審稿時間: 0.0 month(s)
結果: 待定&不明


撰寫評論

2025-12-18 20:59:18 評論於
How many reviewers does the host have?
(0) 讚! | 忽然1234

作者: 忽然1234


領域: 工程技术
審稿時間: 0.0 month(s)
結果: 待定&不明


撰寫評論

2025-12-18 20:58:47 評論於
How many reviewers are there, OP?
(0) 讚! | 忽然1234

作者: 杳无音讯


領域: 材料科学
審稿時間: 0.0 month(s)
結果: 待定&不明


撰寫評論

2025-11-26 12:01:30 評論於
Love in dreams. Hope for external review.
(0) 讚! | 杳无音讯

作者: sncl


領域: 化学
審稿時間: 0.0 month(s)
結果: 待定&不明


撰寫評論

2025-11-24 08:36:47 評論於
Oct 25, 2025 S T J
Nov 06, 2025 UR
Nov 17, 2025 Revise
Nov 24, 2025 Revise Submitted

The review process was so fast! Hope everything goes smoothly from here!

P.S. For papers with more than 8 authors, a statement must be included in the cover letter, regardless of whether it is a first submission or a revision.
(0) 讚! | sncl

作者: cy


領域: 材料科学
審稿時間: 0.0 month(s)
結果: 待定&不明


撰寫評論

2025-11-02 00:38:56 評論於
Hello, may I ask if this journal is open for editing? Who is your chosen editor?
(0) 讚! | cy

作者: cy


領域: 材料科学
審稿時間: 0.0 month(s)
結果: 待定&不明


撰寫評論

2025-11-02 00:36:30 評論於
Boss, may I ask which editor you have chosen?
(0) 讚! | cy

作者: sncl


領域: 化学
審稿時間: 0.0 month(s)
結果: 待定&不明


撰寫評論

2025-10-21 12:41:20 評論於
25.10.21 S T J
Hope for good luck.
(0) 讚! | sncl

作者: cfiber


領域: 材料科学
審稿時間: 0.0 month(s)
結果: 待定&不明


撰寫評論

2025-10-13 20:31:41 評論於
Agreed, the impact factor of Part B is relatively high.
(0) 讚! | cfiber

作者: cfiber


領域: 材料科学
審稿時間: 0.0 month(s)
結果: 待定&不明


撰寫評論

2025-10-13 20:22:05 評論於
Amazing, amazing, Part A has a very good reputation, and personally I feel it surpasses Part B, even though Part B has a higher impact factor.
(0) 讚! | cfiber

作者: Tpolymer


領域: 材料科学
審稿時間: 0.0 month(s)
結果: 待定&不明


撰寫評論

2025-10-13 09:48:24 評論於
Initial Date Submitted: Sep 25 2025 
With editor: Oct 6 2025 
Under Review: Oct 12 2025
(0) 讚! | Tpolymer

作者: 机械小水


領域: 工程技术
審稿時間: 3.0 month(s)
結果: 修改後接受


撰寫評論

2025-10-09 22:24:16 評論於
First article: Submitted on May 28, 2024, employed on January 04, 2025
Second article: Submitted on April 14, 2025, employed on July 19, 2025
Third article: Submitted on July 27, 2025, employed on October 09, 2025
Efficiency is increasing!
(0) 讚! | 机械小水

首頁    上一頁    1    2    3    4    5    6    7    下一頁    末頁  (頁
/10)

開始撰寫 [COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING] 的評論:





Contact us

Contact us  

Your name*

Your email*

Your message*

Please fill in all fields and provide a valid email.

Security Code*